• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Problems Removing Manifolds

Share this page

Thor

Thor

Senior Member
Offline
I am attempting to remove both the intake and exhaust manifolds to replace them with an exhaust header and a manifold with a HIF-6 for my midget. I removed all the bolts I could find. There were 4 across the top and 1 on either side of the exhaust manifold. I don't see any others but can't seem to free the manifolds.

The Right side does seem loose as I can wiggle it almost free but the left side seems to be hanging on something.

Does anyone know if there are bolts I may have overlooked or have any suggestions on how to free the manifolds?

Thanks for any help
 
Thor,
There are two more if we are talking a 1500. Look inbetween the intake and exhaust maniflods on either side of the center exhaust runner and you should see two long nuts. These are a bear too get to but can be removed.
 
Back
Top