• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

problem installing steering wheel

Share this page

D

dezand

Senior Member
Country flag
Offline
Four years ago I purchased a Moss repro adjustable steering wheel for my 1960 3000 Mk1.
I finally got around to installing it this past weekend and it will not go completely on. It goes about 1/2 way on the spline but then jams.
Has anyone installed one of these?
Any help is appreciated.
 
Forgive me if you know this, have you loosened the collar on the hub of the wheel? That's what allows the wheel to lock into place.
 
3 years ago, I bought a tourist trophy and an adjustable hub. I couldn't get it all the way on the shaft unless I unscrewed the locking collar and removed it. I had to grind off some metal under where the locking collar grips the metal fingers on the hub. It was a royal pain. I should have returned it but
" made it fit " instead.
Ed
 
thanks for the tips.
I did have the locking collar removed and it goes over the split spline area fine and into the full spline a bit then jams.
I will probably just do a bit of filing to make it fit.
 
Back
Top