• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Priming oil pump

Share this page

Jim_Gruber

Jim_Gruber

Yoda
Country flag
Offline
Now I can,t find my note on priming the oil pump on a 948. Can someone refresh my memory please on the technique. I'll spend more time looking than just asking the list. Thanks
 
The earlier A series engines have a oil pump priming plug near the water jacket drain plug. Take the plug out 5/8" pour some oil in that hole.
 
On side of engine IIRC left side?
 
I see it. OMG Bill giving me Tech Tips.
 
It is easiest to use the bolt that holds the oil line that goes to the oil filter, unscrew it and just pour in the oil
BillM
 
Thanks Guys, later today if I get time I'll be back in the garage. Rain, Rain looks like Fireworks may be a washout today.
 
But I do get to go and see the grandkids, hey a plus any day:smile: And get fed.
 
Billm said:
It is easiest to use the bolt that holds the oil line that goes to the oil filter, unscrew it and just pour in the oil
BillM
Click to expand...

+2! If you can have the car leaning a bit towards the pump that helps as well.

Kurt
 
Back
Top