• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGA Pre-MGA Twin Cams

Share this page

aeronca65t

aeronca65t

Great Pumpkin
Offline
I found a neat page about pre-MGA Twin Cams (used in T Series cars). The pictures below are MG engines. Go here:

https://www.mgvr.org/keepers/t_twins.html

uihlein_xpag.jpg


runyan_xpag.jpg
 
Talk about a blast from the past! Thanks!

When I was a kid, a buddy's older brother had a '52 TD that he restored from the ground up. He found a twin cam set up that we tried to use, but never could get it running. We ended up rebuilding the original engine and buried the twin cam in his back yard when they enlarged their driveway /ubbthreads/images/graemlins/crazyeyes.gif

Bruce /ubbthreads/images/graemlins/cheers.gif
 
AAARRRGGGHHHHH!!!!!!!
 
I know...I think of all the dumb things I have done over the years...the '57 chevy convertible, the Duece coupe that I could have bought for $250, the '67 Vette I refused to pay $2500 for, the above mentioned '52 TD, a TR4A from the original owner, and selling my BRG '69 MGB...

That engine was 30 years ago and it is rust now. And I don't think the new owners of the property would appreciate my digging around in probably what is over 300 tons of fill to look for it /ubbthreads/images/graemlins/crazy.gif

Bruce /ubbthreads/images/graemlins/cheers.gif
 
/ubbthreads/images/graemlins/cryin.gif /ubbthreads/images/graemlins/cryin.gif /ubbthreads/images/graemlins/cryin.gif
 
A number of years ago I was snorkling in about 12 feet of water in Pirates Cove down in paradise Island (before they turned it into neo classic Disneyland/las Vegas)

and thought I identified a familiar freind..

Took a dive down, and sure enough, alway great for a boat mooriing was a 1622cc. block...could still read the ID's of it..!!!
 
Back
Top