• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Position of the hood / bonnet buffer wedges on a TR6

Share this page

S

Serge Decorte

Freshman Member
Offline
I am restoring my 1974 TR6 and need some help finding how to position the 4 buffer wedges for the bonnet / hood. I have the holes pre-drilled on the top of fender but the buffers are not. Not sure if you need to have it aligned with the top of fender or resting on the base of the bottom lip. Also which side of the wedge is facing the fender.
Pictures displayed on the blog would help, not as a link as they are sometimes difficult to open or require q subscription.
Thanks a lot
 
Serge,
You posted this question in your "Blog" (The Blog is a place where you just post stuff like what you're doing on your restoration, or post about some car show - in other words, it's a personal blog. People may visit it but there is no guarantee.

To get answers to specific questions about your TR6, you would be better served if you posted the question in the "Triumph Forum". Click on the Forums link in the upper navigation menu to list all of the available forums, then click on "Triumph" to enter that forum where you can post questions and have higher likelihood people will see, and reply.

Basil
 
Back
Top