-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Polished Metal Coating to Protect Shine
- Thread starter dmorris1
- Start date
Share this page
dougie
Luke Skywalker
Offline
You want to apply a 2k hi-gloss urethane. Without paying through the nose for quart of automotive high gloss, activator and reducer, the best alternative is from Eastwood products. https://www.eastwood.com/spray-max-2k-high-gloss-clearcoat-aerosol.html This would be the best (ease of application) method to clear coat your parts in a professional manor if you don't have the necessary spray equipment. After polishing said parts, I would suggest a complete and thorough wipe down with denatured alcohol with a clean cotton rag to remove any residual polishing compounds. Change the rags often if you have a lot of parts or contamination.