-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
plating at home
- Thread starter dh100m
- Start date
Share this page
GregW
Yoda
Offline
Hi DH,
I've used Caswell's plating system with good results. Mostly with their Nickel, but have dabbled with copper. Here is a link to a discussion of it with some photos. Click Me You can get to their website on the left side of this Forum under "Supporting Vendors", look for the banner of the PC gun. PC standing for powder coating.
I've used Caswell's plating system with good results. Mostly with their Nickel, but have dabbled with copper. Here is a link to a discussion of it with some photos. Click Me You can get to their website on the left side of this Forum under "Supporting Vendors", look for the banner of the PC gun. PC standing for powder coating.
