• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Placement of Studs on 4.2 jag

Share this page

S

sacat

Freshman Member
Offline
Placement of Studs on 4.2 jag

My brother had the head done on his 4.2 jag ,but when he romoved the head he also removed all he studs and bought new ones. BUT HE DID NOT MARK THE STUDS FOR REPLACEMENT!!!!

Can any one tell me the order of replacement
Thanks!
 
Re: Placement of Studs on 4.2 jag

Ahh. "New Studs." Good.

My books are 50 miles away or I'd volunteer. Sorry.

EDIT: In the 3.8 manual the "dowel" stud is the only "odd" one, and goes in the second from front hole on the exhaust side. Check the underside of the head to find the "socketed" hole(s)?
 
Re: Placement of Studs on 4.2 jag

When I last checked the index stud (2nd back left side) was unavailable. This stud has a 1/2" shoulder at the bottom. The second back from the front and rear are the longer studs to accomodate the lifting brackets.

Alan T
 
Back
Top