• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Pitted chrome repair?

Share this page

NutmegCT

NutmegCT

Great Pumpkin
Bronze
Offline
Is there a way to improve this surface, other than having it re-plated?

View attachment 36089

Note I said "improve" ...

My initial thought: grind/file it smooth to the touch, paint with aerosol "chrome finish", then clear coat, then wax. Seems this would at least end the possibility of corrosion hitting those raised bumps.

Thanks.
Tom
 
How their finished is entirely up to you Tom, but if you want them to look nice, re chroming is the only option. Probably around $40.00 ea. PJ
 
With a surface like that I have smoothed it with steel wool and then coated it with car wax.
It does a surprisingly good job for a daily driver but not good enough for a show car.
BillM
 
Thanks gents. Bill, did the steel wool actually remove the small "bumps"? so the surface was relatively smooth?
 
Yes it did a surprising job- you will have fun when you get some old parts to practice on
Bill
 
Thanks Bill. I'd never have guessed that steel wool would cut down those bumps; thought it would take a grinder.
 
Billm said:
Any progress/results?
BillM
Click to expand...

I can presume - no - since I was to mail some door handles to Tom and it has been to %&?|!!$ cold to get them. Actually I went to look tonight and discovered the apartment shower's drain had frozen and was leaking - so, will try tomorrow. (sorry Tom)
 
NutmegCT said:
Hang in there J-P. Maybe I should also test chrome for "freeze protection".

eek
Click to expand...

Pretty sure the chrome is freeze protected. Not sure I am!
 
NutmegCT said:
Thanks Bill. I'd never have guessed that steel wool would cut down those bumps; thought it would take a grinder.
Click to expand...
Best to use a stainless steel wool as the ordinary kitchen stuff leaves a residue that can rust. It is usually available in coarseness gradients from 0 to 4 (coarse to fine).
Tom
 
TomMull said:
Best to use a stainless steel wool as the ordinary kitchen stuff leaves a residue that can rust. It is usually available in coarseness gradients from 0 to 4 (coarse to fine).
Tom
Click to expand...

Thanks Tom. Have you ever done this on pitted chromed surfaces? I'm trying to gather as much info as I can from guys who have tried this.
 
NutmegCT said:
Thanks Tom. Have you ever done this on pitted chromed surfaces? I'm trying to gather as much info as I can from guys who have tried this.
Click to expand...

I've done this in the past, mostly on old boats with chromed bronze hardware and fittings. No secrets or tricks, the steel wool does what it was designed to do, clean.The steel wool is soft enough so that it mars the surface of the chrome only slightly and takes some of the loose stuff and high spots off.

Clean pitted chrome looks better than dirty, stained pitted chrome. It will forever remain pitted however, until it is re-plated. Don't expect a dramatic transformation, either. At best, the results may look decent at 25 feet and even better at 50, etc.

I do not use it on dirty or stained chrome that is good condition, though. A soft cloth with cleaner/polish is better in that case.
For what it's worth,
Tom
 
Back
Top