-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Pinion seal PN
- Thread starter Hoghead
- Start date
Share this page
homebeforedark
Senior Member
Offline
Factory part # is ATC7085. GACO # INC48155. Moss # 021-191. Sometimes the GACO number will cross to a National or Chicago Rawhide #.
Offline
I just put Moss # 021-191 in my BJ7. Working perfectly. Heres a hint. The reason that I am installing a new seal now because we just changed the ring & pinion about 2 months ago, the reason is that we did not push the seal in far enough and the metal part of the seal was wearing on the un-machined part of the collar of the pinion flange. But be careful, if you push it in too far it will not wipe on the collar at all. Dave.