-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Petrol Question
- Thread starter huck6
- Start date
Share this page
You'll probably get more informed advice from another user, but for now...
You can use a lead additive, but a more permanent solution is to get an unleaded head conversion, or a newer engine. If I'm not mistaken, using unleaded in an engine that requires leaded fuel will cause damage to valves fairly quickly.
You can use a lead additive, but a more permanent solution is to get an unleaded head conversion, or a newer engine. If I'm not mistaken, using unleaded in an engine that requires leaded fuel will cause damage to valves fairly quickly.
TypeRboy
Jedi Warrior
Offline
Hi and welcome to the forum.I read an article back when unleaded was just new anbout the longlivity of lead motors on unleaded. It was in road and track. The test took place over the period of a year,and used american cars,so metalurgy could be different, but the upshot was about 30 to 50% less life on the exhaust valves.
The intake valves showed no appreciable accelerated wear ( I think that's how I read it..)
So instead of doing your head once in a lifetime, you may do it twice or three times.Of course the next time it willget hardened valve seats and be done with the problem..
The intake valves showed no appreciable accelerated wear ( I think that's how I read it..)
So instead of doing your head once in a lifetime, you may do it twice or three times.Of course the next time it willget hardened valve seats and be done with the problem..