• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Pertronix and Timing

Share this page

HI, There is not much latitude for changing the wire size in the Dizzy cap. It is safest to stick with the standard [ 7 mm ] size wire that fits easily in the entry holes in the cap.---Keoke
 
So end of saga. Bought a coil wire. Fits the pertronix fine. Cut off the distributor boot end and learned how to feed into my side entry dizzy. Car runs so much better. Couldn't notice a miss and loads of power. Will look into copper stranded sp wires for the future. Now onto learning about tri-carb settings as it is running rich but that may take a lifetime. Reviewed many posts and they are intimidating. Plugs are on the dark side but I will settle for an easier start and a reaaly smoooth ride.

Thanks to all for your help,

Eric
 
Glad to hear we could help you out. Be sure and find you some solid stranded copper hitension wire, one very good brand is Packard usually carried by better auto part store there are others.

OH we can also help you here on the forum lean out the carbs so start a new thread when you are ready.--Fwiw--Keoke
 
Back
Top