• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Pegs-top and tonneau

Share this page

A

Arrow

Senior Member
Country flag
Offline
Purchased new top/tonneau pegs from Moss. All three types included which included the nuts. It has been a number of years since I took these off the car and I did bag and label them but took the old parts to one of my buildings in NJ where I have two more TR-3s. What I do not recall is if originals have lock washers. Does any one know if they had lock washers or just the nuts? Thanks Tom

IMG_1255.jpg
 
Last edited:
Don't know what is proper, but I used lock washers on the inside of the body shell to help to keep the pegs tight. I also used clear plastic flat washers on the outside to avoid marring the paint when tightening the pegs down.
 
I don't believe there were any washers originally.
 
Back
Top