• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Pegs-top and tonneau

Share this page

A

Arrow

Senior Member
Country flag
Offline
Purchased new top/tonneau pegs from Moss. All three types included which included the nuts. It has been a number of years since I took these off the car and I did bag and label them but took the old parts to one of my buildings in NJ where I have two more TR-3s. What I do not recall is if originals have lock washers. Does any one know if they had lock washers or just the nuts? Thanks Tom

IMG_1255.jpg
 
Last edited:
Don't know what is proper, but I used lock washers on the inside of the body shell to help to keep the pegs tight. I also used clear plastic flat washers on the outside to avoid marring the paint when tightening the pegs down.
 
I don't believe there were any washers originally.
 
Back
Top