• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Pedal box seal question

Share this page

T

tdskip

Yoda
Country flag
Offline
For a Bugeye which of these are needed? My car as bought only had #25.

Anyone have a picture of how it should look?

SPM-1102_1.gif
 
I don't have either.
 
Only number 25 and you can make it with a bit of 90 lb roofing felt.
 
My '66 Sprite MkIII also has #24. The pedal box has a couple channels welded on that retain the foam seal #24. I'd always thought that the pedal boxes and MC's were the same for these cars, but if you pedal box does not have the channels made to retain the seal, perhaps seal #24 was added later. I used some pickup truck/camper shell gasket material to make #25, but purchased #24 from VB or Moss. It's just a piece of 1/4" thick black foam with a couple slits for the pedals. Easy to make if you have the material.
 
Back
Top