• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Pedal box seal question

Share this page

T

tdskip

Yoda
Country flag
Offline
For a Bugeye which of these are needed? My car as bought only had #25.

Anyone have a picture of how it should look?

SPM-1102_1.gif
 
I don't have either.
 
Only number 25 and you can make it with a bit of 90 lb roofing felt.
 
My '66 Sprite MkIII also has #24. The pedal box has a couple channels welded on that retain the foam seal #24. I'd always thought that the pedal boxes and MC's were the same for these cars, but if you pedal box does not have the channels made to retain the seal, perhaps seal #24 was added later. I used some pickup truck/camper shell gasket material to make #25, but purchased #24 from VB or Moss. It's just a piece of 1/4" thick black foam with a couple slits for the pedals. Easy to make if you have the material.
 
Back
Top