• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Spitfire Parts interchange????

Share this page

N

nomad

Yoda
Offline
Wondering if the spitfire steering rack is the same as the TR4 rack. They appear in pictures to be the same but no one lists them as the same. Sooo, whats the difference??

Thank's
Kurt.
 
Isn't the Spitfire track narrower than the TR4? If so, the rack will be shorter as well.
 
The spitfire rack measures 44 3/4 inches center to center of the tierod end. Maybe someone else has the TR4 info. You can see the arrows I marked on my bench when it was out. I just went out to the garage and measured the distance
 

Attachments

  • image.jpg
    image.jpg
    193.6 KB · Views: 130
Shorter stands to reason but how about other parts. Mainly for now tie rod ends? Also pinion gear, boots, seals?
 
The factory was usually pretty good about using the same number for the same part; as it was cheaper that way. If the factory part numbers are different, then the parts are usually different in some way. Of course, sometimes a new number could replace an old one; for example the later non-sleeved thermostat is listed as a replacement for the earlier sleeved thermostat. But if they knew up front the parts were the same, they got the same part number.

Sorry I can't be any more help. But I've compared the Stag parts to the TR6, and practically everything is different. Tie rods are thicker, rack housing is bigger, and so on. Looking at Rhodyspit's photo, I suspect you'll find the same thing between TR4 and Spitfire. ISTR the TR4 rack looking rather beefier than that.
The Moss website is another place you can check, to see if parts are the same. Just like the factory, they would rather stock one part instead of two, so they use common part numbers when they can. Looks like the boots and pinion are the same, but not tie rod ends. You'll have to check the others for yourself :)
 
Thanks Randall. I do have a spitfire catalog but not for the bigger TR's. Never thought about on line catalogs! Guess I'm living in the past!

Kurt
 
Back
Top