Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Gentlemen:
Previously I was given information in the forum regarding a part. I was hoping to get the same info again:
- I've got a 1960 BE with a 1275. The oil pipe from the engine block to the dual gauge is leaking. I ordered p/n AHA6392 from Moss Europe. It is described as "pipe, oil (rubber hose to block)." The section of pipe I have that is leaking runs from the block to another brass fitting that then continues on to the Dual Gauge. I do not have the rubber hose described in the parts catalogue.
Can anyone give me some insight in this?
Thanks,
Mike Pennell
Previously I was given information in the forum regarding a part. I was hoping to get the same info again:
- I've got a 1960 BE with a 1275. The oil pipe from the engine block to the dual gauge is leaking. I ordered p/n AHA6392 from Moss Europe. It is described as "pipe, oil (rubber hose to block)." The section of pipe I have that is leaking runs from the block to another brass fitting that then continues on to the Dual Gauge. I do not have the rubber hose described in the parts catalogue.
Can anyone give me some insight in this?
Thanks,
Mike Pennell
