• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A part numbers for tr3 clutch

Share this page

S

sp53

Yoda
Country flag
Offline
Does anybody have the part numbers for the clutch and pressure plate to fit a tr3? Perhaps the Borg Warner numbers or another large supplier.
Sp53
 
I have a brandy new in the box clutch and pressure plate from moss motors, purchased last fall, turns out I do not need it. I would be happy to sell it to someone who could use it. 60 cents on the dollar. Tom
 
The clutch disc I just installed -- brand AP or 'Automotive Products' is p/n HB9713Q. This is the Moss part... I don't know if you can actually get a clutch disc branded by Borg & Beck.

Do you actually need a new pressure plate? I replaced mine because the old one broke (that was the failure rather than a worn disc) but as I understand it that is a rather rare situation as these guys (the 3-finger type) are pretty robust.

Oops... I just figured out that AP *is* Borg & Beck. Doh!
 
Hi Tom I am definitely interested. How do you want to proceed? You can call me in Washington State at 253 475- 1133 or you can use email Sp53 @u.washington.edu

Sp53
 
I tried email I don't think it worked. I will check the boxes this weekend and let you know excactly what part/ part numbers I have and we can take it from there. Tom
 
Hi Tom, yes evidently the email did not go through. Try again and see what happens, I checked the address and it should have worked. If you want you can post your address, and I will try from this end.

Sp53
 
Aloha Sp53,

A few years ago I bought a Borg & Beck pressure plate with cover from Moss for my TR3. Their part # was 593-000, I found the box yesterday cleaning my garage. The numbers on the box were: GCC127
Borg & Beck
NHA2520
Cover Assembly 228mm
LL42J
GB

Hope this is helpful.

Safety Fast,
Dave
 
This is what I have in the box, parts were ordered from Moss.
Borg & Beck disc part Moss part 4-207 delphi (tm) part no NHB9715 description driven plate 229 mm.

Release Bearing/ throw out bearing Green Bearings part # CB1087. Moss part 4-352

Borg & Beck pressure plate, marked as follows 4LCEG0213a and fingers marked No 51022,


all of this was purchased from Moss as clutch kit moss part 593-055.

Tom
 
Hi Tom I am kinda confused on the part number. I looked at the Moss online catalog and found a part number 593-050 for tr2-4 that was a N/A kit. But let me get home and look at the Moss's hard copy because I have found some editorial problems with the Moss catalog that is on line before. In addition, is the clutch a delphi brand or Borg Warner brand? And what is your best price for the lot? You can email me at sp53@u.washington.edu
sp53
 
Back
Top