Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I have 5k on my rebuilt(not by me) OD.
Unit has worked great since install with quick engagement in and out.Recently the engagement IN is noticeably slower
about 3-5 seconds.I use the clutch and now the shift happens after I engage the clutch rather than during the disengaged time.Disengagement is still almost instant.
Fluid and sump screen are clean and proper level.
I think the adjustment lever and rod may need to be moved a little more past the line up hole(maybe it slipped a little) but was wondering if anything else comes to mind.
Thanks
Tom
Unit has worked great since install with quick engagement in and out.Recently the engagement IN is noticeably slower
about 3-5 seconds.I use the clutch and now the shift happens after I engage the clutch rather than during the disengaged time.Disengagement is still almost instant.
Fluid and sump screen are clean and proper level.
I think the adjustment lever and rod may need to be moved a little more past the line up hole(maybe it slipped a little) but was wondering if anything else comes to mind.
Thanks
Tom