• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

"one" question for donald healey

Share this page

Re: "one" question for donald healey

I met Donald Healey and exercised the opportunity to ask him my one question. Thinking quickly and lightheartedly, I asked "How the heck did he build these cars with nuts and bolts in such hard to reach places?" Quick on the uptake without losing a beat he replied "Small hands!"

This was at the Cape Cod meet many years ago.
 
Re: "one" question for donald healey

I had the pleasure of meeting Donald Healey at the Austin-Healeys West meet-Sept 4&5 1976 in Eureka, Ca. Two things I'll aways remember are how sharp he was for his age(thought he was quite old back then)& him swimming with girls(ladies) at 7:30 in the morning in the pool. Also he signed my BJ8 factory parts manual & drew an arrow to the title& said beaneath it "hope you never need it DMH" British humor ,cheers Genos2
 
Re: "one" question for donald healey

Now that sound like the same DMH guy I been goin on about. Keoke-- :laugh:
 
Re: "one" question for donald healey

The thing about our stories from those of us fortunate enough to have met members of the Healey family, is that it was (and still is) possible to actually do that. Can you imagine Enzo Ferrari being so accessible?
 
Re: "one" question for donald healey

gents, thanks, i expected that all the responses to the questioning of d.m.h. would be similar to my own and they were, loved reading the anecdotes as well, gregw, to answer your question id ask Mr.Healey of his vision of a contemporary version of the big healey, id like to know how he would feel now about installing an 8cyl. hed most likley have done it back then if he could have gotten them, and perhaps get a sketch or two of his body design, i often wonder what he might do having modern manufacturing methods, and the advanced materials we have today, knowing of what hed be able to do with all this and not having the fiscal restrictions of his day im shure he could produce something that would blow alot of the newer "sportscars" we have now right out of the water, kinda like handing Leonardo D. an airbrush. thanks all again. anthony 7. :savewave: -- p.s. johnny im sorry but s.s. exhaust system was sold exactly 12 minutes after i last spoke to you.
 
Re: "one" question for donald healey

As many of you know, I have a Healey with a Ford 302 V8 engine.

I had the opportunity to meet and talk to DMH on one of his trips to Dallas in the early 80's

Tim&DMH1.JPG


I "cautiously" told him that I had a small block Ford V8 in one of his cars and while I was too much in awe of him to remember his exact words, he reminded/informed me that he had tried, unsuccessfully, for years to procure an American V8 for a future run of cars.

I do remember that he remarked that he bet it was a "good time" driving it. I assured him that it was......

During the 2004 San Antonio Conclave, I met both John Healey and Bic Healey.

JohnBicTim.JPG


They both examined my car and its changes during the car show.

Both in private and during a very public Q & A Forum, I asked them what their father would think about some of the engine, transmission, rear end, brake, and suspension swaps and upgrades that some people were doing to "his" cars.

They both assured me that being a race car driver and experimenter as well as a car manufacturer that he would LOVED to have had, for his use, the range of engines and other driveline and chassis components that the technology of today has produced.

In their responses, I feel that with my 8 pounds per horsepower, electronic ignition, and 4 speed automatic overdrive transmission, that DMH is up there smiling and saying, "You GO ! Guy".

Tim
 
Re: "one" question for donald healey

cotton top, i thought we would be hearing from you on the 8 cyl. issue, wow!! what a great experience you had with the "healeys" both four wheeled and the two legged types, thanks for sharing. anthony7. :thumbsup:
 
Re: "one" question for donald healey

anthony7777 said:
thanks for sharing.
Click to expand...

Thanks Anthony,

I also had the opportunity and HONOR to take what they both told me was the FIRST picture ever taken of the TWO of them in an Austin Healey. They have each had lots of pics taken of them separately, but none together.

I have sent each of them a framed print.

Tim

JohnBicHealey.JPG
 
Re: "one" question for donald healey

Cottontop, thanks for that input!!....it validates what I had thought...I believed DMH would have appreciated my EFI Healey 6 cyl. 3 liter.

Cheers,
Steve
 
Re: "one" question for donald healey

The recent passing of John Healey makes the above pictures even more special.

Rest in Peace, John...

Tim Moran
 
Re: "one" question for donald healey

I wonder why people assume that Donald Healey would not approve of their modifications to Austin-Healeys?
DMH, indeed all his family were race engineers, modification was their business. While I still believe he would not have wanted to mass produce his cars with other than English components (Nash-Healey notwithstanding) he certainly took every opportunity to improve their performance, with a view to maintaining his market share. I am sure if fuel injection was available it would have been tried. He was also a pragmatic engineer, making the best use of whatever was available from the BMC inventory at the time.
 
Back
Top