• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A One more Steering Box question.

Share this page

K

karls59tr

Obi Wan
Bronze
Country flag
Offline
Is there a torque value for the cover plate bolts and top cover bolts or do we just go by what seems right by "mechanics feel"?
 
Another approach is to refer to one of the "standard torque" charts. Here's one that actually includes British bolt grades (but not lubricated/dry/plated etc)
https://mdmetric.com/tech/torqcht1a.pdf
 
If I remember those are 5/16" fine. I generally use 14ft/lbs for that size if it's not specified. Not scientific, but if you browse the torque specs in the general section, almost all 5/16" bolts are 14-16ft lbs. Since they give us no value, that should be close.
 
Back
Top