• Hi Guest! Being a Paying Supporter is NOT a requirement to participate at BCF. However, subscribing will help ensure we can continue to serve the LBC community for years to come. If you enjoy BCF and find our forum a useful resource...Please consider supporting us by **Upgrading**
    (PS: Subscribers don't see this banner)

TR2/3/3A On those old original coils


Country flag
On those old original coils they had that wood screw kinda deal that went into the high voltage chamber. Can that be removed and cleaned without damaging anything, like letting the oil out? I just cannot visualize what that screw goes into and what a good way to seal it up would be when removed. Or if a guy should just leave it alone and clean the top of the screw with a shape screw driver and call that good.


Country flag
I assume it is soldered to the tiny high tension coil wire underneath...so, like you, I didn't want to mess with it. Not for fear of oil loss, but more because those wires are so tiny to deal with.

In the end, I just used the bead blaster to clean it from the opening available.


Country flag
Good call with the bead blaster John, I must be getting old I forget sometimes about the bead blaster; heck years ago that was my best go to tool. I must admit, many years ago I pulled a screw out and put it back in with some Indian head gasket sealer and everything worked out fine, but I just do not trust taking one out. This time I have the original coli with lettering I think CB and SW or something and I am a little more causes. Thanks again good call.
Similar threads
Thread starter Title Forum Replies Date
AngliaGT Got Lucky Today - CHECK THOSE BOLTS! Spridgets 6
jlaird MGB For those who were excited with me. MG 2
tr6nitjulius General TR Those were the days Triumph 4
S TR2/3/3A fixed one of those brass fuel shut off deals? Triumph 13
S TR2/3/3A those 3 white wires onto the ignition switch Triumph 3
S TR2/3/3A source for those little drain hoses Triumph 6
M TR2/3/3A For those with blue/white/black TR3 badges Triumph 7
S TR2/3/3A Those chrome 4 bolts Triumph 1
Jim_Gruber A Victory to report over those bastard Rear Drum Circlips for Bugsy IV/Hub rubbing Spridgets 3
Jim_Gruber 1/4 Elliptic Spring Clamps - Are those Whitworth Threads on those 1/4 Screws Spridgets 7
NutmegCT Loosen those nuts! Restoration & Tools 5
HealeyRick Those Were the Days Austin Healey 11
Joe Reed General MG One of those "duh" moments... MG 4
Jim_Gruber Help Needed, getting those 1/4 Eliptics out of the spring mounting box Spridgets 24
alanjohnturner TR6 for those planning a new paint job Triumph 3
glemon General TR Those Darn Throttle Shaft Bushings [TR4-6] Triumph 8
drooartz General Tech Check those brake hoses! MG 11
WillR For those thread nerds. Restoration & Tools 23
5 I used to own one of those Spridgets 6
S TR2/3/3A Those colored frames Triumph 4
M Those cork washers on either side of the kingpin... Spridgets 9
T TR2/3/3A Is there a good way to manage all those wires/connectors for headlights & park lights Triumph 9
Basil General MG For those who remember Tony Barnhill MG 25
stuntflyr An October Drive. a photo for those of you in the frozen NE... Austin Healey 16
drambuie No sound affects when breaking those little Christmas lights! Austin Healey 16
S General TR Those who think Victoria British is slow getting our TR parts to us Triumph 10
CJD One of Those Days Triumph 15
P those infernal thrust washers Triumph 11
S TR2/3/3A those metal button trim pieces tr3 Triumph 5
rick_ingram Check those splines! MG 7
L For those who know the difference Lotus 5
DrEntropy Where'd THOSE come from?!? Spotted 6
JohnnyMead Can't Get the Air Out of Those brakes! Triumph 8
Gundy Oh no...I've become one of those Spridgets 25
Got_All_4 Wedge Going to look at one of those yucky brown TR7's th Triumph 25
middie Those dashed darned brake calper bolts Spridgets 6
D One Of Those Nights Triumph 4
PATR8 It is just one of those weeks Triumph 8
B Those little tiny screws Triumph 4
Timd For those who like data and statistics Spridgets 6
K Those who switched back to points from petronixx.. Triumph 64
PatGalvin Tie Down Those Brake Lines to the Diff Triumph 4
zedvictor1 Those fender holes behind the RB Spridgets 6
roscoe One of those moments Austin Healey 0
T For those about to weld Triumph 3
pjsmetana Those darn Battery Terminals! Triumph 16
T OT - but for those of us doing body work scary Triumph 12
deadair TR2/3/3A For those who's TR3s are up on blocks Triumph 14
T Keith [Mallard] - any luck getting those bits on? Triumph 3
swift6 Question for those running a Moss Supercharger... Triumph 10

Similar threads