• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Oil Cooler Install Help

Share this page

Tabcon

Tabcon

Jedi Warrior
Offline
I was hoping someone here may be able to help me with the oil cooler and catch tank plumbing set up specific to the Triumph TR4. I'd really like to see a schematic or photos, or both showing how this is done. My Purolator filter head has been converted to the spin on filter type, and the oil pressure gauge tube is still connected here. The old Purolator pressure regulator set up concerns me a little and I was considering using a remote filter, pressure and thermostat set up from Mocal. Maybe a newer type oil pressure sending unit? Any suggestions on which type of cooler, a radiator or laminar type, which work well with the TR4 would be appreciated also.

Oh yea, did I mention picures?
 
Back
Top