• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

no.1 cylinder position in Distributor?

CanberraBJ8

Jedi Trainee
Offline
Can anyone point me in the right direction to find the position of the rotor button for no.1 cylinder in the distributor on a BJ8 (I'm assuming its the same for other Healey models?)

Had some new leads made for my car over Xmas, but I don't seem to have them back on the right plugs - evidenced by mis-firing and popping when trying to start.

I was under the impression that the position/lead for number 1 was the furtherest right hand lead away from the coil lead side ?

Thanks
Simon
 
Check this thread.

#824871 - 01/20/12 10:21 AM Ignition wires

IMG_1481-1.jpg


I have colored the #1 plug wire red in this photo. It goes right under the coil wire which is top center. #1 goes bottom center. #4 is to the left of #1 because it is 6th in firing order. #5 is to the right of #1 because it is 2nd in firing order.
 
Thanks Tim. This is the position I have currently on the car, so I wonder what is going on? The first time I tried with the layout opposite, that is, I thought that the lead for cylinder six was the one I was told was for 1 - the length of the leads works out with this too :crazy: When I turned the key there was a single pop/backfire and I quit, realising there was something wrong...

This time there were a couple of fires on a few cylinders before a coupe of backfires, where upon i quit again. Given the positions were correct, do you think there is something else wrong, or is it just clearing some unburned fuel or something?

... Doh, I can see the problem... I quizzed my guy about which way the dizzy rotated, and he said clockwise. Must have got confused. Ok, dumb mistake :wall:

thanks for the help.
 
Back
Top