Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Guys,
I just installed new outer window seals on my BJ7, which has roll up windows. They seem to be positions properly, and the fit looks good. The windows roll up perfectly, but... When I roll the windows down, the part of the rubber seal that comes in contact with the window rolls under as the window retracts into the opening.
I contacted the supplier. They advised that the rubber is new and quite soft, to prevent this, they suggested using "window wax", which will act almost as a lubricant.
Has anyone else run into a similar issue, or is there a different remedy than window wax.
Any suggestions are greatly appreciated.
Thank you.
I just installed new outer window seals on my BJ7, which has roll up windows. They seem to be positions properly, and the fit looks good. The windows roll up perfectly, but... When I roll the windows down, the part of the rubber seal that comes in contact with the window rolls under as the window retracts into the opening.
I contacted the supplier. They advised that the rubber is new and quite soft, to prevent this, they suggested using "window wax", which will act almost as a lubricant.
Has anyone else run into a similar issue, or is there a different remedy than window wax.
Any suggestions are greatly appreciated.
Thank you.