Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I'm gathering parts parts for my tub rebuild this winter. A couple days ago I got 2 floor pans and both inner rockers. These parts were labeled made in the UK.
I set the inner rockers on the frame and placed the floor pans on top. What I noticed was a larger than original gap between the rocker and floor pan. The original looks to have about 5/16 inch clearance to flush. The replacement parts have about 5/8 - 7/8 clearance.
Could the original clearance be from settling over time or are the replacement panels this bad requiring additional major surgery?
Gordo
I set the inner rockers on the frame and placed the floor pans on top. What I noticed was a larger than original gap between the rocker and floor pan. The original looks to have about 5/16 inch clearance to flush. The replacement parts have about 5/8 - 7/8 clearance.
Could the original clearance be from settling over time or are the replacement panels this bad requiring additional major surgery?
Gordo
