• Notice: If you're posting to get rid of the little man (Lucas), please post A NEW TOPIC with something meaningful. Tell us about yourself and your interest in British cars. You need not share anything too personal. NOTE: this New Member's Forum is only to introduce yourself. If you have specific questions about your little British car, please post those in the appropriate marque-related forum.
    Thanks and welcome to BCF!
    Basil
  • Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

New [to this board] TR6 member

Share this page

B

Bob_TR6

Senior Member
Country flag
Offline
Greetings:

I found out about this board after I ran into a member with a spitfire--I flagged him down.

I've got a '73 TR6 with a megasquirt FI system, as well as Ford EDIS. I'll be asking quite a few questions as I get them dialed in--I've had the car for about 8 years, and added the fuel injection last summer, rather than try to sort the Carbs and distributer. Hindsight says the carbs and Dizzy might have been easier :wink:

I'll also be spending some time this summer trying to isolate the 'offset' in the frame that causes the body to not sit straight... :frown:

Who else is in Minnesota, USA?

BobH
 
Welcome, Bob!

Post your questions in the TR section, and you'll get more help than you can shake a stick at.

Several folks up your way; they'll pop in soon, no doubt.

:cheers:
Mickey
 
Welcome aboard Bob. I'm sure we have some other members from Mina-soooota." AT least one - the guy you flagged down!
 
Welcome Bob
How cold is it up that-a-way.... any-way
Have a great time here!!
 
Morn`n Bob,

"Welcome" to "THEE" best LBC forum you`ll come across but I suspect by now; You know that!

As mentioned; Jump into the "TRIUMP" Forum and ask away with questions, make suggestions etc.

Have a Fun Time,

Russ
 
Hey Bob,
Glad to see you made it. Been away from the forum doing the dual Dellorto setup on the spit. Also had to change out the head gasket and replace the front seal. Rust on the crank nut wore out the seal. Stupidity on my part caused the gasket to blow.
Drop by the hangar some morning for coffee.

Darwin
 
Back
Top