• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

New Supporting Vendor, Introduction and Discounts!

Share this page

aseriesspares

aseriesspares

Senior Member
Offline
Hello,

This is a quick introduction of our business on British Car Forum!
We have just recently become a supporting vendor and would now like to let you know what we can offer you!

We are a British based company specialising in development and manufacture of enhancement parts for Classic, Custom and Race application!

<span style="font-weight: bold">Discount code: bcf15</span>

Here is a quick glance of what we can offer!

1. Austin Healey Sprite ' In a Box' - Every nut, washer, Bolt and Set screw you would need for a full build!

2. A-SD Electronic Distributors, Built from the drive gear up in our workshops! Brand new units!

3. Car Alarms and Central Locking kits - Developed by our workshops!

<span style="font-weight: bold">Our 'In a Box' range is proving to be very popular and we are very proud of the range! </span>

Head on over to www.aseriesspares.co.uk to see our full range!

Many thanks for looking, I will happily answer any questions that you have about any of the products we list :smile:

Rob

The A-Series Team
 
Welcome, Rob - good to have you aboard!

:cheers:
Mickey
 
I'd be interested in an AH BJ7 "In a Box" hardware kit. I'm getting back into a ground up restoration after a few years away from it. I'd like to replace fasteners. I'd also be interested in the SS option. Are you anywhere near putting a kit like that together?
Dale
 
Where are my manners? Welcome to the BCF!
Dale
 
RestoreThemAll said:
I'd be interested in an AH BJ7 "In a Box" hardware kit. I'm getting back into a ground up restoration after a few years away from it. I'd like to replace fasteners. I'd also be interested in the SS option. Are you anywhere near putting a kit like that together?
Dale
Click to expand...

Hello,

This is a model that we have started to look through!
With these hardware sets we like to get the vehicle in the workshop and strip them, build them back up and then research through our archive folders to make sure they are as complete as possible!

So far we are relying on archive folders for this model as we have been unable to locate one!

Stainless steel is fine, there are certain applications that we will not offer stainless for, for safety :smile:

I can keep you posted on this or we can put you a set together from our archives as a work in progress set ? :smile:

Many thanks,

Rob
 
Rob,
Thank you for the response. Why don't you keep us all posted for now. I'm certain that I've seen hardware sourcing as a topic a couple of times, for BJ7's and BJ8's. I have some work to do before I'll need hardware.
Dale
 
Back
Top