• Notice: If you're posting to get rid of the little man (Lucas), please post A NEW TOPIC with something meaningful. Tell us about yourself and your interest in British cars. You need not share anything too personal. NOTE: this New Member's Forum is only to introduce yourself. If you have specific questions about your little British car, please post those in the appropriate marque-related forum.
    Thanks and welcome to BCF!
    Basil
  • Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

New Member

Share this page

L

LionelJrudd

Jedi Trainee
Country flag
Offline
Hi Everyone. Just came across this forum and already impressed with the conversation going on. I have owned an imported LHD TR3A since about 2008. The vehicle was mostly rusted out but came with some some additional wings. I have collected further parts over the years and rebuilt the chassis. Now I am rebuilding the body. Still along way to go. Lionel
 
Welcome Lionel,

Be sure to post to the Triumph Forum here anytime you want a bit of advice on your TR3A. I know how much help I was able to get from the experts here when I still had my TR3B.

Please post photos of your progress as you get the chance, and visit the Pub sometime to join in the conversations on just about anything.

Enjoy the ride.
 
Hi Lionel, welcome to the asylum!

Always good to hear about other's progress (I love work, I could watch it all day), so feel free to tell us about it if you want.
 
Happy to have another friend fro down under! Welcome and as has been said above, be sure to check in in our Triumph forum as well!

Basil
 
Hello Lionel

Welcome to the forum.

You will find the Triumph section very active with plenty of tips, advice and help.

The Pub section is for wide ranging discussions on almost anything.

If you have not already come across them there is an Australian company that makes good sheet metal parts. I got a seat pan from them and was very happy with the quality.
https://www.kas-kilmartin.com.au

David
 
Back
Top