Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
hondo402000
Darth Vader
Offline
I see Damper dudes offer an Aluminum Damper for a TR6 2.5 pounds about around 200, is it worth going to New lightened one? Since I am spending my retirement on my TR6 Engine
Hondo
Hondo
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR6 New Aluminum Damper for TR6
- Thread starter hondo402000
- Start date
Share this page
TR3driver
Great Pumpkin - R.I.P
Offline
My opinion, keep the damper stock and spend the money on an alloy flywheel. That should get you as light as you would want to go, on the street.
Might be a different story if you are going drag racing, I guess.
Note that what is really important is moment of inertia, which is related to both mass (weight) and the square of the radius. Thus, removing one pound from the larger flywheel has much more of an effect than removing one pound from the smaller damper.
Might be a different story if you are going drag racing, I guess.
Note that what is really important is moment of inertia, which is related to both mass (weight) and the square of the radius. Thus, removing one pound from the larger flywheel has much more of an effect than removing one pound from the smaller damper.
OP
hondo402000
Darth Vader
Offline
Don you are correct, that looks like it was said with a frowney face, I didnt see a ! but Randal you are going in the right direction, does a damper do a better job of dampening vibrations having more mass? so would AL damper not do as an effective job? I dont mind spending money on things that are worth it but not just because its light
and Don just playing with you
Hondo
and Don just playing with you
Hondo
TR3driver
Great Pumpkin - R.I.P
Offline
Beats me. More mass might help, but I think maybe the elastomeric (rubber) portion is the important bit. From that point of view, likely anything new will outperform the original, old hard rubber.hondo402000 said:
From what Kas Kastner has said about TR6 cranks, I'm not sure a damper is what's needed anyway. Apparently the biggest problem is lateral flex rather than torsion. They measured some huge amount of runout at the flywheel surface, and blamed it on lack of overlap in what amounts to a 'stroker' crank.