• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Need Screws

Share this page

DNK

DNK

Great Pumpkin
Country flag
Offline
Looking for these in a stainless or a good out door, prefer stainless.
For my fireplace vent
FireplaceVentscrews.jpg
 
Don - Home Depot carries them. Small packs or boxes of 250.

Tom
 
I'm pretty sure our local Ace Hardware has them too. Some are better than others, but Ace is usually worth a try.
 
I was at home depot and they had them, but in the specialty screw area, not the boxes of screws.
 
Wait a Minuit. We are talking
Stainless Steel #12 X5" long??

And
Stainless 10X24 X 4" long??
 
Been to my local store . Not impressed. We have a better local company near here that has bigger selection.

Tacoma Screw
 
Don
High Strength Bolt in Kent blows the doors off of any Tacoma Screw any day, both in price and selection. I will never even bother with Tacoma Screw again!
BillM
 
I'm still waiting for the comment on how hard it is to find a good long screw anymore.

What? :jester:
 
Bill, But Kent, come on,I'm in Lynnwood...though I will be there on Monday measuring a job...
 
If you are still looking, try McFeelys www.mcfeelys.com

They'll have stainless (both 305 and 316) up to about 18" long, they sell mostly square head and star head.

Worst case, if you only need a handful, my local supply probably has them, 5" stainless will be phillips head though. I pretty much only use stainless anymore.

PM me your address.
 
Back
Top