• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

MGB Need help identifying these parts

Share this page

J

johnrdm

Freshman Member
Offline
Hi,
I got these with some Healey parts.
Is this an MGB soft top frame and valve cover?
Thanks
JohnM
 

Attachments

  • IMG_9081.jpg
    IMG_9081.jpg
    52.8 KB · Views: 202
  • IMG_9082.jpg
    IMG_9082.jpg
    68.5 KB · Views: 210
  • IMG_9083.JPG
    IMG_9083.JPG
    88.7 KB · Views: 212
  • IMG_9084.JPG
    IMG_9084.JPG
    84 KB · Views: 206
  • IMG_9085.JPG
    IMG_9085.JPG
    76.1 KB · Views: 214
  • IMG_9086.jpg
    IMG_9086.jpg
    42 KB · Views: 211
I am not sure about the top, MG B will have a metal strip in the back pocket of the top that hooks to two chrome type clips on back deck if the valve cover is apox. 12 inches it is say Morris or Mini like 900cc If it 15 inches a MG B by year the tube will tell you that Madflyer
 
Not sure what the top is from, but not MGB. And as Madflyer says, scale is everything with the valve cover. MGB is 15" end-to-end,
 
Thanks for the replies.

The valve cover is 15" end to end - what do I look for in the tube to get the year?

JohnM
 
It is not in the tube, rather if there is one or not. I'm not certain, but ISTR post-1967 the tube was fitted. Pre-smog control engines had no vent tube on the valve cover, the engine was vented at the front lifter cover plate.
 
Back
Top