• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Need Bumper Help [pics]

Share this page

M

Miser

Senior Member
Offline
See the angle of the part of the bumper brace that touches the car? I am pointing to it in the third picture. Do I have the correct brace on the correct side? I think it makes more sense for the angle of the brace to be the opposite way so it fits more flush. But according to the Moss picture (the last picture) it looks like I have it right. The second picture really shows how the angle of the brace would "dig into" the car so I think I have the wrong one on the wrong side. The repair manual is no help at all.

IMG_4878.jpg


IMG_4881.jpg


IMG_4882.jpg


IMG_4884.jpg
 
You have it backwards. Swap out the braces (both pieces), rubber is correct. The straight edge of the brace goes to the inside. The insert is showing left side but on the right side of the bumper.

Marv
 
Hope this helps:

IMG_0744.jpg


Back when I was taking the bumperettes off!
 
Back
Top