• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Need bugeye part

Share this page

M

mightymidget

Jedi Knight
Offline
I was getting ready to order a drivers side outer sill part#455-495(rocker panel) for my Bugeye. I ONLY NEED SECTION from the door jam forward. Anybody got the half I need in good shape.

I called Moss hoping they might have one that was damaged.

Anyway if any body has one they want to sell..let me know

Also getting ready to order;
lower left door hinge repair section part#455-065

end cap for outer sill part#452-160

1/4 elliptic springplates part #265-600
 
I may. I will need to cut mine from just below the anterior of the A post. Let me get picture for you, to see if it will work. I also have the lower hinge section as I needed a complete A post. Do not be surprised if you will need that also.
Paul
 
Actually the bolts broke off in lower hinge, since I was replacing lower section of apost from light rust decided to go ahead and replace.

if you measure 39" from the rear is where my cut point is
 
Good news. If the messurement is from the back on the top of the sill, I need the back 38 inches. I'll sell you the hinge ($17.00 and throw-in the front section) plus shipping. PM me if you are interested.
Paul
 
Hi,


I have the outer rocker panel. It's brand new. I will be happy to sell it for $$50.00 plus $15.00 for shipping. i am located just outside of pittsburgh, PA.

If you're interested just let me know.


Bob
 



Uploaded with ImageShack.us


Uploaded with ImageShack.us:


Thanks to some members in helping me with some of the parts I needed, I have been able to start on body repairs again. Outer sill patch replacement, still not finished gringing welds, and a homemade patch in wheel well.

Between the spring rebuild, axle rebuild, body patches, when one hits a roadblock I have another eay to go
 
Back
Top