• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Need a pulley

Share this page

apbos

apbos

Jedi Knight
Offline
I've been cleaning up parts and started on the generator. My pulley looks like it has seen its last days. It comes from a lucas c40 generator/dynamo. Any leads on a used source (<~$89 from the suppliers).

Thanks

Paul
 

Attachments

  • 10170.jpg
    10170.jpg
    149.3 KB · Views: 78
  • 10171.jpg
    10171.jpg
    170.4 KB · Views: 67
Is this for a mechanically driven tach? If so, I got one. Measure it and let me know what the outside diameter is.
 
Is this for a mechanically driven tach? Yes 3 5/8 OD. The ID of the shaft is difficult to measure as it has been roughed up-also. It has a keyway and is rivited.

Thanks

Paul
 
I've got a couple, you're welcome to one. Send me your address and I'll send it off. I'm in Davis, shipping should be cheap.

Glen
 
The id are the same for all years, (I believe.) The od is what you need to worry about if you are running a mech. tach.
 
This has to be a delivery record. :thumbsup: :thumbsup: :thumbsup: Glen is in Davis 95 miles away. Abe another forum member is in Davis today and is coming down here to check out a bonnet that I got from another member (Cortina) for some parts for his sprite. I call Abe; as I know he knows Glen and Abe delivers pulley to me at 7:45pm.
2303172441_a03024c68d.jpg


Glen even paints the pulley for me :crazyeyes: and the paint is not even dry when its in my hands. This forum is great :winner1:

Thank guys

Paul
 
Boy, talk about fast parts delivery. And you are correct, this forum is great as always.
 
Just Curious... what is the correct size of the pulley for a tach drive generator? I picked up a used generator, that has the tach drive, but I'm not 100% sure it came from a bugeye. I think so T series cars also used the tach drive, right?
 
3 5/8" od. The tack will not read correctly with a different od. I had a smaller pulley from, i imagine, a later spridget. Tach was reading about twice as it should.
 
Thanks Barry!

This one appears to be the correct size. Since I don't know it's history, I'm going to have a local shop rebuild it... might as well.
 
Back
Top