• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGB mystery wiring plug

Share this page

S

Svcmangler

Member
Country flag
Offline
Hello everyone, just finishing putting the engine back in the car and hooking everything up. I have come across a wiring harness plug that I can't see where it goes. Can anyone tell me what it is for? It is attached to a wiring harness that runs from the passenger side of the firewall and across over to the drivers side. I do not see where the mate to this plug is. I would greatly appreciate any assistance.
IMG_9393.jpg
 
Looks like the brake proportioning valve plug. Follow all the brake pipes on the inner fender….the plug will fit on the top.
Your brake light on the dash maybe laminating?
 
Agree that it's for the brake proportioning valve. On the late MGBs with a brake servo the valve is on the bottom of the master cylinder.
 
Back
Top