• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGB Mystery fastener from '66. Did I miss something?

Share this page

V

Vardaman

Member
Country flag
Offline
I found this on the floor and I'm pretty sure it's from the MGB. I've been working on the brakes and the carbs. Then again, it could be from another project. Any ideas? I don't want to have any missing fasteners.
 

Attachments

  • IMG_20221226_133158416.jpg
    IMG_20221226_133158416.jpg
    670.4 KB · Views: 169
  • IMG_20221226_133214979_HDR.jpg
    IMG_20221226_133214979_HDR.jpg
    677.1 KB · Views: 175
  • IMG_20221226_133235598_HDR.jpg
    IMG_20221226_133235598_HDR.jpg
    577.3 KB · Views: 183
Doesn't look like any MGB fastener I'm familiar with.
 
I agree with Doc, I've had three MGBs, one a ground-up restoration, and never saw a fitting like that. It does appear old though. It looks like a female grub screw.? PJ
 
On seeing the first shot I thought: "Dzus" fastener (battery cover). But not with a shoulder at both ends. Looks like something missing in the middle. Plenty of MGB/MGA/MG-T series restorations here and never seen that fastener on/in one.

Mystery bit. Hope someone can shed some light on it!
 
It is indeed threaded on the inside. I'll just assume Santa's elves left it there when they took away the clevis pin from the parking brake that has suddenly disappeared from the garage. ;)
 
Back
Top