• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Mystery Bracket

Share this page

HighAltitudeTR3

HighAltitudeTR3

Jedi Trainee
Country flag
Offline
Any one know what this could be? I have scoured the images of TR3 interiors and I can't find anything that would attach.

Its located to the left of the glove box.
 

Attachments

  • IMG_9599.jpg
    IMG_9599.jpg
    57.3 KB · Views: 210
For the Ashtray.

Couple of pics off the net

image.jpg

image.jpg

Cheers,
Tush
 
The long bracket is the support to the dash as well as the base for the heater. I am sure you knew that one. Then the smaller bracket underneath that is the ash tray bracket. The ash tray fit on this and slid in and out. As the ash tray was supposedly an option it is not found in many books. You of course are missing the actual ash tray.
Charley
 
Tr3aguy said:
+1 what Tush said I actually have one in my spare car! It had a Bakelite front, I could send a pic later??
Click to expand...

I don't smoke, but I sure would like to put use to that bracket. Let me know when you get a pic. Thanks!!
 
Geo Hahn said:
You may change your mind when you find out what a decent ashtray costs.
Click to expand...

Not so much the ashtray, more the Bakelite front...

Cheers
Tush
 
HighAltitudeTR3 said:
I don't smoke, but I sure would like to put use to that bracket. Let me know when you get a pic. Thanks!!
Click to expand...

The big problem with the ash tray is that it is right in the way of any taller passenger's left knee. I have seen the ash tray without the bakelite face plate at a more reasonable price--say under $100. For myself I purchased an ash tray and then got a very good photo of the face plate and made my own. I used JB WELD to make a blank then carved out the design on the face. I do believe that it came out very real looking.
Charley
 
We need pictures Charley! :cool:

Cheers
Tush
 
Didn't work JP.

Cheers
Tush
 
M_Pied_Lourd said:
We need pictures Charley! :cool:

Cheers
Tush
Click to expand...
Tush,
Sorry I gave the car to my son about 10 years ago. He does still have it. The picture that you posted looks just like it --or the other way around, if you get my meaning. I started with a measurement of the overall demensions for the blank. Then made it thick enough so the I could carve the face down to leave the ribs/ design.
Charley
 
charleyf said:
... I started with a measurement of the overall demensions for the blank. Then made it thick enough so the I could carve the face down to leave the ribs/ design.
Click to expand...

Very crafty. This would also be a great project for someone with access to a 3D printer.

On another forum, another car, many small plastic bits that are NLA are being recreated on 3D printers. I haven't done this myself but have seen the photos of the results and see that it works well for some parts.
 
I got a friend who is who is great with these kind of tasks. I may send him the part to see what he could do! Once the design is in would anyone else need one??

JP



Geo Hahn said:
Very crafty. This would also be a great project for someone with access to a 3D printer.

On another forum, another car, many small plastic bits that are NLA are being recreated on 3D printers. I haven't done this myself but have seen the photos of the results and see that it works well for some parts.
Click to expand...
 
The last photos from Tr3aguy show two screw heads on the front of the face plate They should NOT BE THERE. It is fastened from the back.
Charley
 
Back
Top