• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

My '77 Corvette Project

Share this page

Hopefully, it'll roll out of the garage this week for photos.....right now, I'm having problems with the spare tire carrier.....& I'm trying to decide what to do with fue tanks since I'm going from a carbureated engine to a TPI one.
 
Rolled the completed chassis out into the sun today for first time....next is ga
tank work:

chassis03.JPG


chassis02.JPG
 
This is really looking great and I love the wheels. Why didn't you take the entire front end apart, and then have all the parts and frame blasted? Just curious.
 
I had the rolling chassis pressure washed & then sandblasted & then primed & painted......when I took it home, everything was clean....I put it on jackstands & started disassembling pieces for cleaning & rebuild....so, I'd take, for example, the A-arms apart, sand blast, inspect, paint & rebuild......6 months I spent on every item attached to the frame.....everything is nowe new or rebuilt.

The wheels are stock Corvette rallies that have their centers but no trim rings yet.
 
Mighty fine.
 
I have a friend, Henry Younger, who built one of those. <span style="text-decoration: underline">Corvette Enthusiast</span> followed his build....totally modern drivetrain but looks like a '57.....it was in the museum in Bolling Green for a while.
 
Right now I'm working on my engine....wow is fuel injection different!
 
& I hate to admit it but I just bought a Haynes manual for the engine alone.....said as I tuck my tail between my legs and wander off into Corvette-land.
 
:lol:

Retro fit a Lucas sliding throttle rig to it!! :jester:
 
Doc, sigh.......
 
I'm kinda proud of this modification....my car was originally a carbureated car using a mechanical fuel pump....but, I'm using an '86 TPI engine so will be pushing 43 or so pounda of fuel via an electric fuel pump....I wanted the pump in my '77 tank so I modded the '77 pickup with an '86 pickup & in-tank pump...here are some photos:

'86 setup on left, my '77 on right:

tank01.jpg


Think about it...think...think.

My '77 pickup modded with the '86 in-tank pump:

tank04.jpg


It'll sit about 1/2" off the tank bottom with a "sock" over the pick-up end as an in-tank fuel filter....hehehe

However, have you ever had a huge V8 engine on an engine stand....it'll roll over to the heavy side in a heartbeat & 1 man can't roll it back over....just as well because the oil pan had to be removed to get all the dents out of it!

Inside of motor looks like new...took an hour to bang out the bottom of the oil pan!
 
Tony;
You're my HERO.
I have a '64 El Camino that I intend on changing to a TPI system.
After looking at those pics, I can now see where I will go.
I'll be speakin' with ya!

Dave :thumbsup:
 
14dna said:
Tony;
You're my HERO.
I have a '64 El Camino that I intend on changing to a TPI system.
After looking at those pics, I can now see where I will go.
I'll be speakin' with ya!

Dave :thumbsup:
Click to expand...
I've got a continuing thread on a couple of the Corvette sites - & I'm learning from the also.

TPI is easy to put on any small block 350...& I've found the guy to do the wiring & computer modifications - as well as the guy to provide the guts of a 200-4R transmission so it'll hold up to a hot engine.
 
First off, Tony, I'm running a four speed.
And, I am a mechanic (40 years), But I never thought of using my own tank and just refitting it to accommodate the fuel pump.
I used to work for the OPP (Ontario Provincial Police) and they have a few older cruisers at the training center with the LT1 engines (300 Hp 350 CID, with TPI and all wiring).
This basically solves my final problem of fuel so I can now get on with it.
Thanks, I owe you.

Dave :thumbsup:
 
Nice job with that lift pump old man! :jester: :thumbsup:

Good sound engineering from where I sit.
 
Well, I'm sorta like the newbie in the LBC world - I don't know enough about Corvettes to know what I can & can't do!

Dave, lemme know if I can help again - you'll probably be called upon when I start installing my 8 new injectors - only $300 for the set!
 
Watch this space tonight for new photos & update!

WOO-HOO!!
 
tap tap tap...
 
Today's 19 November....Started in May with an old '77 Corvette I found on the side of the road.

Now, I know there's still lots to do to the engine, but I just couldn't wait. I had to drop it into the frame. I'll do everything else from there.

&, remember, when I started rebuilding everything, I didn't know anything about Corvettes....I was the proverbial newbie! Now my rolling chassis/engine/transmission are brand new.

That's a 1986 5.7L Corvette TPI engine connected to an '88 Monte Carlo SS built 200-4R transmission


engine01.jpg


engine02.jpg


engine03.jpg
 
Back
Top