• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A Multiple parts needed for a TR3A.

Share this page

T

TFR

Jedi Trainee
Offline
Hi, Need the connector that connects the top and bottom inner steering shafts. The rods slide into it and two bolts tighten the clamps to secure the shafts.

Please look at your spares and let me know if you have one. Can pay by paypal or money order. Help out a fellow Triumph owner and restorer.
Thanks!
 
Re: Steering part needed for a TR3A.

Larry-

Might have a lead, sent you a pm.

Randy
65 TR4
 
Re: Steering part needed for a TR3A.

Guys, still in need of a couple parts.

I need the still need the connector (miss it on ebay) and a support bracket from the dash to the fire wall.

Please check your spares and be generous to a fellow member.
 
Re: Steering part needed for a TR3A.

I should have that support as I'm parting out a "3" right now...
 
Re: Steering part needed for a TR3A.

Looks like I'm in need of more stuff.

Now I need the bonnet spring mechanism that mounts on the front cowl.

PLEASE keep looking...
 
Re: Steering part needed for a TR3A.

Larry -

I had one left over from the 3 that I restored a while back. Not sure if I kept it when I sold the car or not. I'll look later today. If I find it, it's yours.

Mickey
 
Re: Steering part needed for a TR3A.

Well, I guess I need...

A steering shaft connector
Brace for dash
Hood latch spring assembly

Thanks again
 
Re: Steering part needed for a TR3A.

Larry -

I checked my shop - must have let it go with the car, or someone else got it a while back. Sorry...

Keep an eye on ebay - I've seen them pop up from time to time.
 
Re: Steering part needed for a TR3A.

Anyone else have any of these parts?
 
Re: Steering part needed for a TR3A.

Looks like he's building a car from scratch
 
Re: Steering part needed for a TR3A.

NO I assumed the build in the middle and he hadn't worked on it in four years. He said he had parts at his parents and they are in a retirement home and don't know the parts were stored.

Please check your spares.
 
Re: Steering part needed for a TR3A.

I have an extra spring piece and tie bar that mounts to the front cowl.. Still interested?

Let me know!
 
Re: Steering part needed for a TR3A.

Yes, I am very interested. Just need to know your price and method of payment. I use paypal a lot and prefer that method. You get your money fast and I get my part.

LEt me know
 
Re: Steering part needed for a TR3A.

Not one of the TR3 guys have these parts that would help out a member...

PLEASE...
 
Re: Steering part needed for a TR3A.

So; all you need now is the steering shaft connector, right ? I'll dig around this weekend and see if I can turn one up.
 
Re: Steering part needed for a TR3A.

TR3driver and Mkutz please contact me about the parts you may have... I need them as soon as possible to complete this car.
 
Re: Steering part needed for a TR3A.

Thanks, now I need the hood latch spring unit that mounts on the cowel.
 
Re: Steering part needed for a TR3A.

Hi TFR -- Yes I tried to send you a private message a few weeks ago about that but didn't get a response, and thought you found a new one. Anyhow, I was thinking $20 plus $5 shipping for the part-- still interested? Do me a favor and just email me at mkutz20904@yahoo.com.

Thanks so much!
 
Back
Top