Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
Sometime in the last five years I recall reading a suggestion to deal with the difficulty of accessing that awkward third bolt on the right hand fender. As I recall, the person offered that if you place the fender nut on the shroud rather than the fender at that location, you can put that bolt in from the fender side rather than having to reach around the cooling hose on the engine side.
I am going to be mounting my front shroud and fenders this weekend and wondered about the suggestion. Does the idea work?
Wisdom from the list?
Thanks.
Lin
1960 BT7 in restoration
1959 Bugeye
I am going to be mounting my front shroud and fenders this weekend and wondered about the suggestion. Does the idea work?
Wisdom from the list?
Thanks.
Lin
1960 BT7 in restoration
1959 Bugeye