• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

more fuel pump problems

Share this page

aeronca65t

aeronca65t

Great Pumpkin
Offline
5/16-18 UNF thread with 1/2" hex head

A counter-person at a hardware store might incorrectly call this nut a "1/2 inch fine" (referring to the wrench size and fine thread).

Last time I used my magnetic pick-up tool was for this exact problem.
 
i was putting a replacement mechanical fuel pump on the midget today and murphys law kicked in as i dropped one of the nuts down into the "black hole" between the starter and the block.
mad.gif
does anybody happen to know what size these nuts are so i can get one from the hardware store without having to pull the other one off?
confused.gif
 
Back
Top