Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Gerry9870
Freshman Member
Offline
Hey folks
I'm reaching out to you all to see if anyone could steer on my midget issue.
Badically car started 1st time everytime and even without choke.
However i decidedto bling the engine up and bought a refurb set of tein SU HS4s.
They carbs were built onto a manifold and according to the builder, fully set up.
So i contemplated on whether to strip and fit or fit as sll in one, ie remove inlet.
So inlet was removed and I fitted the refurb set.after connecting it up, fuel lines etc, the car wont start.
Thinking something had failed I went over timing and reset that, checked spark etc, even set static timing, checked fuel in the bowls etc, and nothing., its apure head scratcher.
Any help or advice would be greatly appreciated.
Thanks
Gerry
I'm reaching out to you all to see if anyone could steer on my midget issue.
Badically car started 1st time everytime and even without choke.
However i decidedto bling the engine up and bought a refurb set of tein SU HS4s.
They carbs were built onto a manifold and according to the builder, fully set up.
So i contemplated on whether to strip and fit or fit as sll in one, ie remove inlet.
So inlet was removed and I fitted the refurb set.after connecting it up, fuel lines etc, the car wont start.
Thinking something had failed I went over timing and reset that, checked spark etc, even set static timing, checked fuel in the bowls etc, and nothing., its apure head scratcher.
Any help or advice would be greatly appreciated.
Thanks
Gerry
