T-Series MGTF Firewall [what goes in what hole]

[CCURTISS]

While I am in the process of my 5 speed conversion I decided to repainting my MGTF firewall and who ever restored the car cut the steering column leather boot to pass the thermostat line through and I am pretty sure that is not correct.

Does anyone have pictures of the proper location for the thermostat wire to pass through the firewall? For that matter I will take any picture you have of other items on the firewall also.

It may be the same in a TD so that may work also.

Thanks,

 

[JimmyG]

curt,

take a look at these links and see if they help.
https://picasaweb.google.com/jimmyg767/20080919123929#5247820029312220306

https://picasaweb.google.com/jimmyg767/20080919123929#5247820018118122050

https://picasaweb.google.com/jimmyg767/20080919123929#5247819999193395426

https://picasaweb.google.com/jimmyg767/20080919123929#5247819981605143202

https://picasaweb.google.com/jimmyg767/20080919123929#5247819968408572258

I usually hang out in the Triumph board but just wandered over to glance at the MG board. I have a fully restored 54 TF.

 

[CCURTISS]

Thanks a bunch, this helps a lot.