• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGB tie rod ends in A-H?

Share this page

A

artmck

Senior Member
Offline
Anybody know if the B tie rod ends will go into Healey steering arms? I'm putting a narrowed B rack into a BN-7.

Haven't checked this, but maybe the tie roda have the same thread so the Healey ends could just be screwed to the B tie roda?

Thanks
 
The taper in the steering arms is at a pretty common angle, so it's probable that the MGB tie-rod ends would fit. If not, tapered reamers are available, or can be made from a straight one, in order for them to mate up properly.
 
Back
Top