-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
MGB MGB [Racing] Front hubs WTD
- Thread starter horizon
- Start date
Share this page
Hap Waldrop
Yoda
Offline
No one as far as I know, I sure some have done this in small batches, or one-offs. What are your trying to achieve, I race a 67 MGB in vintage racing, have 30 years of racing experience with these cars, and never saw a need for it. Now if you are talking rear hubs for a a banjo rear end, many us, self included are running what is referred to as hybrid, meaning the the banjo housing cut on the end then weld back the ends of the alter tube axle housings, so we get the safer hub retention, and the stronger axles. Year ago we made some aluminum hubs for the Spridget, but only sold a few sets of them, not many people lining for a $600 set of hubs, when the stock one works fine 