Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Sopwith_Camel
Jedi Knight
Offline
Well the mg but is home
needs some tlc the kid I bought it from was about 25 and didnt have a drives licenses yet and didnot no how to open the hood and there as no jack with the car or any of the required safety items.
here is a video of the drive home at 40 mph on dry rotted tires
https://www.youtube.com/watch?v=KPKpmi-Melg&feature=youtube_gdata_player
Ok here is the issue
Thrumisate housing was leaking so I orederd a new one. And a gasket.
They showed up today ok quick job then off for a hike... No
the nuts came off ok but housing won't budge so walked to with hammer fewtimes. Nope no luck. Ok a bigger hammer well the housing broke but one section wouldn't come off the bolt. I start wiggling it back and forth and snap off the stud. No problem I picked up a set of reverse thread screws last week
so put the smallest in no luck pulled it out, for fear of breaking it drilled out the whole a bit more and put in the next size up hardens steel revrece thread screw. ..yep broke that one in the head.
suggestions? i guess a very powerfull drill and a whole lot of bits
Having a home brew, steve
needs some tlc the kid I bought it from was about 25 and didnt have a drives licenses yet and didnot no how to open the hood and there as no jack with the car or any of the required safety items.
here is a video of the drive home at 40 mph on dry rotted tires
https://www.youtube.com/watch?v=KPKpmi-Melg&feature=youtube_gdata_player
Ok here is the issue
Thrumisate housing was leaking so I orederd a new one. And a gasket.
They showed up today ok quick job then off for a hike... No
the nuts came off ok but housing won't budge so walked to with hammer fewtimes. Nope no luck. Ok a bigger hammer well the housing broke but one section wouldn't come off the bolt. I start wiggling it back and forth and snap off the stud. No problem I picked up a set of reverse thread screws last week
so put the smallest in no luck pulled it out, for fear of breaking it drilled out the whole a bit more and put in the next size up hardens steel revrece thread screw. ..yep broke that one in the head.
suggestions? i guess a very powerfull drill and a whole lot of bits
Having a home brew, steve