• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGB MGB Anti-Roll Bar

Share this page

M

Missouri722

Freshman Member
Offline
Time to put the B in the shop for the winter. Have several minor and major projects for it while sitting out the winter. One is to find and install an anti-roll bar. I've only seen one model available while searching the internet. Do any of you have suggestions?
 
Hmmm - if you mean anti-sway bar, it's part number 454-965 at Moss. It wasn't standard on my 76B. Moss also has a roll bar for most Bs, 459-025.

Tom
 
I recommend Addco. They advise for the "B" going to 7/8" in the front with 3/4" in the rear. I did this and the car now corners like it never did before and stays balanced through the corner. If you look at their site you can see the one recommended. https://www.addco.net/products/mg.shtml
There is a lot of good info there. If you just put a front sway bar on you will increase understeer by an amount depending on what diameter bar you choose. Also just puting one on the rear or increasing the size will increase oversteer. Replaceing both with what the supplier recommends will keep the car balanced.
Mine came with adjustable links on the rear so they can be adjusted for the right amout of feel.
Bob
 
I think Addco has the front and you have to get the rear bar from Moss; while you are doing it, add the negative camber a arms, (or slot the stock ones to slide them out 1/4" and your B will cornor like a Porsche...I mean that in a good way.
 
No, Addco has both front and rear. Just a different part number for the rear on 74 1/2 and later. Look at the web page.
Bob
 
Back
Top