Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Alex Grant
Member
Offline
Does anyone know if the fasteners that held on the front valance to the body where painted body color or left unpainted?
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
MGA MGA valance fastener
- Thread starter Alex Grant
- Start date
Share this page
Offline
Hi Alex - more experienced minds than mine will give some advice, but I'd suggest you contact the NAMGAR (namgar.com) chairman. There are always varying opinions on original paint and finish.
chairman@namgar.com
Another good source of info:
Barney Gaylord at MGAGURU (mgaguru.com):
barneymg@mgaguru.com
Hope this helps.
Tom M.
chairman@namgar.com
Another good source of info:
Barney Gaylord at MGAGURU (mgaguru.com):
barneymg@mgaguru.com
Hope this helps.
Tom M.
Brinkerhoff
Jedi Knight
Offline
On the MGA all the exterior bolted on panels were painted assembled to the shell so all the attaching fender bolts and washers including the front apron were all painted body color. The fenders were probably not tightened so that color would overspray into the seam , later to be filled with the grey piping.